R290 All in One Heat Pump Heater

The R29 all-in-one heat pump heater is an innovative, efficient home heating solution that is becoming increasingly popular with homeowners. This innovative energy-saving heat pump and water tank functionality are all combined in one unit. It is easy to install and use and reduces the occupied area.

Function：

• Forced Defrosting

When turned on, press and hold the "Up" + "Setting" keys for 5 seconds simultaneously to enter the forced defrosting mode;
When the evaporator coil temperature T6 >13 ℃ or the defrosting time reaches 6 minutes, exit the forced defrosting.

• Lock and Unlock

Press the "Up" + "Down" keys simultaneously for 5 seconds to enter the keyboard lock state, and press and hold them again for 5 seconds to exit the state;

• Controller Panel

1). After being powered on, it will display in full screen for 3 seconds before entering normal working mode;
2). The shutdown status only displays the clock and the upper temperature of the water tank;
3). When turned on, the main interface displays the clock, water tank setting temperature, upper water tank temperature, working mode, and timing status.

• WiFi Connection

1) Step 1: Manually enter the intelligent distribution mode: Long press the " " and " " keys for 5 seconds to enter the pairing state. The "WiFi" icon flashes quickly. After successful pairing, the icon remains on. If pairing is unsuccessful or there is no pairing, after 3 minutes, the icon will not be displayed and will exit the distribution state. The "WiFi" icon will stop flashing, and the WIFI module will no longer be connected to the network. To connect to the network again, long press the " " and " " keys again for 5 seconds;
2) Step 2: Turn on the Bluetooth and WIFI functions of the mobile phone and connect the WIFI hotspot. The WIFI hotspot must be able to connect to the Internet normally, as shown in the figure: Connect the WIFI hotspot "pwwm;
3) Step 3:
Open the "Smart Life" app, log in to the main interface, click "+" or "Add device", enter the device type selection, select "Large Home Appliance" → select "Water Heater" → enter WiFi information → complete.
 

Specification：